Keyword Index

A

  • ABAQUS Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Absorber Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Absorption refrigeration Analysis of Energy and Exergy of Ammonia Salt Double Effect Absorption Refrigeration System with Solar Collector [Volume 25, Issue 2, 2023, Pages 132-154]
  • Absorption refrigeration system Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Acoustic field Effects of high-power high-frequency acoustic noise on the performance of MEMS vibratory gyroscopes [Volume 23, Issue 3, 2021, Pages 75-92]
  • Acrobat robot Fuzzy Dynamic Output Feedback Controller Design for Position Control of a Two-Link Robot [Volume 23, Issue 2, 2021, Pages 199-219]
  • Activated Carbon Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
  • Active Boring Bar Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Active car suspension system Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
  • Active Fluid Flow Control EHD Simulation of Plasma Actuator Effect on Fluid Flow with Boundary Condition Modification in Suzen-Huang Model [Volume 19, Issue 4, 2017, Pages 53-74]
  • Active toe joint Gait control of humanoid robot with toe joints based on reinforcement [(Articles in Press)]
  • Active Vibration Control Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Adaptive control Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2020, Pages 80-98]
  • Adaptive control Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration [Volume 25, Issue 1, 2023, Pages 80-96]
  • Adaptive Control Algorithm Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Adaptive neuron hazy Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Adaptive Observer Adaptive Observer and Fault Tolerant Adaptive Optimal Sliding Mode Controller Designing for 3DOF Helicopter Model in presence of Fault and Actuator Saturation [Volume 23, Issue 4, 2021, Pages 6-28]
  • Additive manufacturing An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Advance Timing Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2016, Pages 55-71]
  • Advance Timing Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Aerodynamic coefficients Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Aerospace Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2023, Pages 51-80]
  • Agglomeration of Nanotubes Effect of Nanotubes Agglomeration on Bending Behavior of Trapezoidal Nanocomposites Reinforced with Carbon Nanotubes [Volume 25, Issue 1, 2023, Pages 60-79]
  • Aging Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Air cooler Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Air-cooling Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Airfoil Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2013, Pages 39-54]
  • Airfoil Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2019, Pages 130-148]
  • Al-A356 alloy Investigation of the Effect of Gas Pressure Forming Parameters on Mold Filling and Sheet Thickness Distribution [Volume 23, Issue 1, 2021, Pages 43-63]
  • Alumina Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Alumina nano fluid Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Aluminum tubes Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Ammonia-water Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Amphetamines Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Amplitude method Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Anaerobic digester The amount of biogas produced in a digester combination of Chinese and Indian models [Volume 18, Issue 4, 2016, Pages 6-28]
  • Analytical Solving Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Analytical study Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Annular circular plate Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2021, Pages 178-204]
  • Annular plate Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
  • Antiplane dislocation Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Anti-plane impact loading Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
  • Aorta artery Numerical Simulation and parametric study of Flexible Aorta Artery [Volume 19, Issue 3, 2017, Pages 6-23]
  • API X65 Steel Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]
  • API X70 steel Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Arbitrary Lagrangian Eulerian method Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2021, Pages 61-74]
  • Articulated Vehicles Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Artificial compressibility Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2013, Pages 6-22]
  • Artificial dissipation One and two dimensional inviscid and two dimensional viscid flow analysis using the kinetic energy preserving scheme [Volume 14, Issue 4, 2012, Pages 93-117]
  • Artificial knee Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Artificial neural network Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2021, Pages 114-132]
  • Artificial neural network Design of a Neural Network Controller for Flying Robots Using a PIP and a Backstopping Trainer [Volume 24, Issue 4, 2022, Pages 6-28]
  • Artificial neural networks Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Aspect Ratio Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Asphalt pavement Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Attached mass Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Audio Detection Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2021, Pages 114-132]
  • Augmented Matrix Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2021, Pages 114-130]
  • Automatic Control Valve The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2017, Pages 41-59]
  • Automotive A/C Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Auxetic materials Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Average convective heat transfer coefficient Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Axial buckling Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Axial collapse Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Axial compressor Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2018, Pages 182-209]
  • Axial compressor Improve the performance of a rotor blade by changing the distance between the tipping point and axial displacement of the blade [Volume 21, Issue 4, 2019, Pages 107-129]
  • Axial flow compressor Numerical simulation of the effect of tip clearance on axial flow compressor performance [Volume 19, Issue 2, 2017, Pages 96-122]
  • Axial impact Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]

B

  • Bandar Abbas Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Battery Management System Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Battery Management System Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Battery Safe Operation Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Beam Model Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Bearings Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Bending Effect of Nanotubes Agglomeration on Bending Behavior of Trapezoidal Nanocomposites Reinforced with Carbon Nanotubes [Volume 25, Issue 1, 2023, Pages 60-79]
  • Bifurcation Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Bifurcation Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Bifurcation dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Bifurcation Chaos Analysis and Control in Gear Transmission System using Model Predictive Sliding Mode Algorithm [Volume 25, Issue 2, 2023, Pages 40-56]
  • Bifurcation Diagram Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2021, Pages 201-220]
  • Bingham Model Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Biogas The amount of biogas produced in a digester combination of Chinese and Indian models [Volume 18, Issue 4, 2016, Pages 6-28]
  • Biomass Gasification Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2019, Pages 59-82]
  • Blockage ratio Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Blower fan Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Blowing ratio Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Bogie wheel and axle Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Boiler Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Boiling heat transfer coefficient Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Boiling mode heat transfe Effects of nanofluids on the boiling-mode cooling of the engine [Volume 20, Issue 4, 2018, Pages 54-77]
  • Bolotin’s method Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
  • Boltzmann method Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Booster landing Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Boundary Condition Modification EHD Simulation of Plasma Actuator Effect on Fluid Flow with Boundary Condition Modification in Suzen-Huang Model [Volume 19, Issue 4, 2017, Pages 53-74]
  • Boundary conditions Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2013, Pages 6-22]
  • Boundary element Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Boundary Elements Method Using of Boundary Elements Method in calculating the displacements and stresses of points on the boundaries of a non-homogeneous material with variable modulus of elasticity [(Articles in Press)]
  • Brain tissue Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Branch Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2014, Pages 25-54]
  • Brinkman-Forchimehr general model Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
  • Brinson Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • BST model Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Bubble departure diameter Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Bubble departure frequency Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Buckling Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Buckling An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Buckling Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Buckling Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Buckling Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
  • Buckling analysis Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Buckling and free vibration analysis Buckling and free vibration analysis of cylindrical panel reinforced by various distributions of CNTs on elastic foundation [Volume 18, Issue 3, 2016, Pages 19-44]
  • Bumps of roads Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2021, Pages 29-60]
  • Bushehr Evaluation the effect of smart glasses on solar heat gain and cooling loads in office building in hot and humid climate of Bushehr [Volume 20, Issue 4, 2018, Pages 97-117]

C

  • Cable Robot Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Carbon Nanotube Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Carbon Nanotube Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Carbon Nanotube Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Carbon nanotubes Investigating the effects of length, diameter and chirality on the mechanical properties of defective carbon nanotubes [Volume 21, Issue 1, 2019, Pages 188-217]
  • Carbon nanotubes Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Carbon Nano tubes Bending analysis of the curved sandwich beam with FG-CNT reinforced faces and flexible core [Volume 24, Issue 1, 2022, Pages 109-142]
  • Car follow Behavior Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Car following Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Cathode Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Cauchy singularity Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2017, Pages 42-63]
  • Cauchy type singular Mixed-mode fracture analysis of infinite isotropic cylinder weakened by multiple cylindrical cracks [Volume 19, Issue 1, 2017, Pages 34-60]
  • Cauchy type singularity Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Cavitation Numerical Investigation of Cavitation Erosion in the Venturi using the Eulerian- Lagrangian Method [Volume 25, Issue 4, 2023, Pages 27-50]
  • Centrifugal Blood Pump 3D Blood Flow Simulation in Artificial Heart with Double Volute using Dynamic Mesh Method [Volume 19, Issue 2, 2017, Pages 6-22]
  • CFD investigation of the longitudinal effects of second step from base on the kogar vessel perfomance [Volume 20, Issue 2, 2018, Pages 92-114]
  • CFD Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • CFD Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • CGP Investigation of constrained groove pressing on the Copper sheets [Volume 19, Issue 1, 2017, Pages 6-18]
  • Chaos Control Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2021, Pages 201-220]
  • Chaotic Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Chaperone protein Studying the Arm's Flexibility of Each Chain of Small Heat Shock Protein as a Nano Actuator [Volume 19, Issue 1, 2017, Pages 19-33]
  • Characteristic curve Experimental study of diffuser effect on the fan performance [Volume 15, Issue 2, 2013, Pages 24-42]
  • Characteristics Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2013, Pages 6-22]
  • Charpy Impact Test Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]
  • Charpy test Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Chatter Suppression Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Chebyshev polynomials Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Chevron pattern Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
  • Circular\annular plate Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity [Volume 24, Issue 3, 2022, Pages 6-27]
  • Circular plate Flexural Vibrations Analysis of Saturated Porous Circular Plates Using Differential Quadrature Method [Volume 19, Issue 1, 2017, Pages 78-100]
  • Circular plate Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Circular plate Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Circular plates Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Circular Tubes Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Classical symmetric airfoil Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Classical theory Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Clearance Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Clothing Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Coefficient of performance Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Co-generation Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2019, Pages 59-82]
  • Cogeneration Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2019, Pages 197-219]
  • Cogeneration Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
  • Coiled Carbon nanotube Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Complex eigenvalues An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Compliant mechanism Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Composite Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2021, Pages 6-28]
  • Composite beam Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Composite beam-plates Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • Composite beams Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]
  • Composite Fish Plate Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Composite pipe Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2023, Pages 6-26]
  • Composite plate with cutout Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions [Volume 19, Issue 3, 2017, Pages 89-107]
  • Compressed air energy storage Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Compressible flow Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Compressor Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Compressor Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
  • Computational fluid dynamic Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Computational fluid dynamics The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
  • Computational fluid dynamics Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Computational fluid dynamics Optimization of vortex tube parameters to achieve the minimum possible temperature [Volume 24, Issue 2, 2022, Pages 107-133]
  • Computational fluid dynamics Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method [Volume 24, Issue 4, 2022, Pages 109-128]
  • Computational fluid dynamics Numerical Study of the Heating System and Solar Radiation Effects on Temperature Variations in a Greenhouse with Glass Walls in Winter [Volume 25, Issue 2, 2023, Pages 57-79]
  • Conceptual design design and simulation of the turbine section in a turbofan engine using numerical methods [(Articles in Press)]
  • Condition monitoring Condition Monitoring of Reciprocating Compressors using Probabilistic Neural Network and Optimization with Genetic Algorithm [Volume 25, Issue 3, 2023, Pages 84-112]
  • Cone frustum Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Conical Duct Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Conjugate gradient method Estimation of fouling profile in a heat exchanger pipe applying the conjugate gradient method based on the inverse algorithm [Volume 17, Issue 4, 2015, Pages 23-45]
  • Constant heat flux Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Constitutive law Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Continuous Regime Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2018, Pages 6-25]
  • Continuum damage-healing mechanic A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2020, Pages 6-29]
  • Control Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Control Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Control Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2023, Pages 51-80]
  • Controllability Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Control Operator Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2021, Pages 77-92]
  • Convection heat transfer Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2017, Pages 60-79]
  • Cooling Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Cooling passages Effects of nanofluids on the boiling-mode cooling of the engine [Volume 20, Issue 4, 2018, Pages 54-77]
  • Cooling towers Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • COP Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Corona wind Experimental evaluation of needle electrode polarity variations effect on enhancement of water evaporation with electrohydrodynamic method [Volume 16, Issue 2, 2014, Pages 38-59]
  • Corrugated core Effects of geometric configurations of corrugated cores on the impact loading and energy absorption of sandwich panels with composite face sheets [Volume 26, Issue 1, 2024]
  • Cortical bone Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2021, Pages 61-74]
  • Crack in interfacial zone Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Crack internal Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
  • Critical fluid velocity Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Critical speed Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Critical Structure Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Cross-Entropy Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Cross-ply Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Cubature Kalman filter GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
  • Current net worth Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Cutout Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Cyclic loading Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Cylindrical model Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Cylindrical panel Buckling and free vibration analysis of cylindrical panel reinforced by various distributions of CNTs on elastic foundation [Volume 18, Issue 3, 2016, Pages 19-44]
  • Cylindrical Panels Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Cylindrical Shells Buckling analysis of circular cylindrical shells made of shape memory alloys in uniform temperature and axisymmetric loading using the exat and numerical solutions [Volume 18, Issue 3, 2016, Pages 61-77]
  • Cylindrical Shells Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Cylindrical vessel Thermoelastic Analysis of Rotating FGM Cylindrical Vessels In an Elastic Medium [Volume 20, Issue 3, 2018, Pages 200-212]

D

  • Damping Capacity Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Data aquisition Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2017, Pages 23-40]
  • Data-Driven Control Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration [Volume 25, Issue 1, 2023, Pages 80-96]
  • Debonding Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
  • Deep Cylindrical Panel Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
  • Defect in the bearing Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Deformational theory Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Dehumidification Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Delaminations Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • Delay Feedback Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2021, Pages 201-220]
  • Density ratio Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Departure An Exprimental Study on Bubble Growth and Departure in Pool Boiling on Wire Mesh and Providing Empirical Relations [Volume 25, Issue 3, 2023, Pages 136-160]
  • Desalination system Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2023, Pages 100-134]
  • Design and Implementation Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Design Builder Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • DesignBuilder software Evaluation the effect of smart glasses on solar heat gain and cooling loads in office building in hot and humid climate of Bushehr [Volume 20, Issue 4, 2018, Pages 97-117]
  • Design of experiments Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Dew point Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Diesel Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2014, Pages 55-80]
  • Diesel engine radiator Numerical investigation of thermal performance of water-Ethylene gelicol-Aluminium oxide in diesel engine radiator of automotive [Volume 14, Issue 4, 2012, Pages 76-92]
  • Differential Quadrature Method Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Differential Quadrature Method Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2021, Pages 178-204]
  • Different wall shape The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
  • Diffuser Experimental study of diffuser effect on the fan performance [Volume 15, Issue 2, 2013, Pages 24-42]
  • Diffusion-kinetic rate model Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Dimensional ratio Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Direct coupling Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2019, Pages 220-238]
  • Direct injection Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2014, Pages 55-80]
  • Discomfort hours The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2019, Pages 33-6]
  • Discrete Actuator Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Discretization of conservation equations One and two dimensional inviscid and two dimensional viscid flow analysis using the kinetic energy preserving scheme [Volume 14, Issue 4, 2012, Pages 93-117]
  • Dislocations Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Dislocation technique Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2017, Pages 42-63]
  • DOM Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2017, Pages 60-79]
  • Double – bonded micro beam Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Double layer micro-channel Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Double twisted-tape Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Double Volute 3D Blood Flow Simulation in Artificial Heart with Double Volute using Dynamic Mesh Method [Volume 19, Issue 2, 2017, Pages 6-22]
  • Downdraft gasifier Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2014, Pages 98-122]
  • DQM Flexural Vibrations Analysis of Saturated Porous Circular Plates Using Differential Quadrature Method [Volume 19, Issue 1, 2017, Pages 78-100]
  • Drag coefficient Experimental study of the effect of surface changes to reduce drag in a triangular array heat exchanger [Volume 20, Issue 4, 2018, Pages 137-153]
  • Drag coefficient An experimental study on drag coefficient of a cam-shaped tube with different aspect ratios [Volume 21, Issue 2, 2019, Pages 75-91]
  • Drip Irrigation Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2019, Pages 220-238]
  • Driver Assistance Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Driver behavior Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Driver-Vehicle Unit Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Driving simulator Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Droplet formation Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Drop weight test Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Dry bulb temperature Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • Dry cooling tower Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2014, Pages 81-97]
  • Dual fuel Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2014, Pages 55-80]
  • Dual Fuel Engine Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2016, Pages 55-71]
  • Dual Fuel Engine Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Ducted Wind Turbine Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2017, Pages 23-40]
  • Dynamic Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Dynamic Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
  • Dynamic Analysis An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Dynamic contact angle Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2015, Pages 85-104]
  • Dynamic instability Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
  • Dynamic Mesh Concept 3D Blood Flow Simulation in Artificial Heart with Double Volute using Dynamic Mesh Method [Volume 19, Issue 2, 2017, Pages 6-22]
  • Dynamic modelling simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Dynamic output feedback control Fuzzy Dynamic Output Feedback Controller Design for Position Control of a Two-Link Robot [Volume 23, Issue 2, 2021, Pages 199-219]
  • Dynamics Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Dynamic shape function Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Dynamic stability Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Dynamic stability analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2021, Pages 93-113]
  • Dynamic stress intensity factors Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]

E

  • Eccentric impact Semi-Analytical Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method [Volume 20, Issue 1, 2018, Pages 25-44]
  • Economical point of view Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Economic Analysis Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Economic Analysis Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
  • Economic Model Potential Analysis of the combination of two types of thermal and member of desalination unit in converting a gas power plant into Combined Water and Power (CWP) [Volume 20, Issue 4, 2018, Pages 154-181]
  • Eddy current braking Three-Dimensional Parametric Modeling of Axial-Flux Eddy-Current Braking System with Effects of Skin Depth and Temperature [Volume 23, Issue 4, 2021, Pages 155-177]
  • Effectiveness Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Effective thermal conductivity Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Efficiency Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Efficiency The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Elastic foundation Buckling and free vibration analysis of cylindrical panel reinforced by various distributions of CNTs on elastic foundation [Volume 18, Issue 3, 2016, Pages 19-44]
  • Elastic foundation Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions [Volume 19, Issue 3, 2017, Pages 89-107]
  • Elastic foundation Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Elastic foundation Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
  • Elastic foundation with shear layer Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Elasto-plastic analysis Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Elastoplastic buckling Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Electrical power Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Electric field Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Electric power generation Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Electrocardiogram A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Electrohydrodynamic Experimental evaluation of needle electrode polarity variations effect on enhancement of water evaporation with electrohydrodynamic method [Volume 16, Issue 2, 2014, Pages 38-59]
  • Electrohydrodynamic Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Electrolyte Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Electromagnetic flowmeter Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method [Volume 24, Issue 4, 2022, Pages 109-128]
  • Electrostatic flow Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2014, Pages 25-54]
  • Electrowinning cell The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
  • Elliptical cavitator Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Elliptical cross section Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Elliptical tubes Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • EMD An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • EMD Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Emission reduction Fuel injection pressure and duration effects on passenger diesel engine performance and emissions [Volume 18, Issue 4, 2016, Pages 96-114]
  • Emotions detection A novel algorithm for detection of speaker emotion for interaction between human and robot [Volume 20, Issue 1, 2018, Pages 92-109]
  • Empirical models Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Energy absorber Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Energy Analysis Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
  • Energy and exergy Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Energy coefficient Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Energy conversion system Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2014, Pages 98-122]
  • Energy Cost Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Energy Efficiency Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Energy harvester Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2023, Pages 81-99]
  • Energy Harvesting Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2021, Pages 178-200]
  • Energy Management A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Energy method Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions [Volume 19, Issue 3, 2017, Pages 89-107]
  • Energy method Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Energy saving The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Energy Simulation Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Engine Effects of nanofluids on the boiling-mode cooling of the engine [Volume 20, Issue 4, 2018, Pages 54-77]
  • Engine emissions Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2016, Pages 55-71]
  • Entropy Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Entropy generation Investigation of Entropy generation in Axisymmetric Stagnation Point Flow of Nano Fluid Impinging on the Cylinder With Constant Wall Temperature [Volume 21, Issue 4, 2019, Pages 58-34]
  • Entropy generation Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Environmental relevance Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2023, Pages 100-134]
  • Euilerain-Lagrangian Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Euler-Bernoulli Beam Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Euler-Bernoulli Beam Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2017, Pages 108-126]
  • Euler-Bernoulli Beam An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Eulerian-Eulerian method Numerical Simulation of Pool Boiling on a Grooved Horizontal Surface [Volume 24, Issue 2, 2022, Pages 77-91]
  • Eulerian lagrangian Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones [Volume 19, Issue 4, 2017, Pages 101-122]
  • Eulerian-Lagrangian method Numerical Investigation of Cavitation Erosion in the Venturi using the Eulerian- Lagrangian Method [Volume 25, Issue 4, 2023, Pages 27-50]
  • Evaporation and wetness of clothing Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Evaporation enhancement Experimental evaluation of needle electrode polarity variations effect on enhancement of water evaporation with electrohydrodynamic method [Volume 16, Issue 2, 2014, Pages 38-59]
  • Evaporator Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Event-triggered control Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
  • Exergoechonomic Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2014, Pages 6-24]
  • Exergoeconomic Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2019, Pages 197-219]
  • Exergoeconomic Analysis Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
  • Exergo-Environmental Analysis Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2019, Pages 59-82]
  • Exergy Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Exergy Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2014, Pages 6-24]
  • Exergy Energy and exergy assessment and parametric study of combination of MATIANT cycle with an organic Rankine cycle (non-emission) [Volume 20, Issue 2, 2018, Pages 6-22]
  • Exergy Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2019, Pages 59-82]
  • Exergy Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Exergy Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
  • Exergy Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2020, Pages 172-204]
  • Exergy Analysis of Energy and Exergy of Ammonia Salt Double Effect Absorption Refrigeration System with Solar Collector [Volume 25, Issue 2, 2023, Pages 132-154]
  • Exergy Analysis Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Exergy Analysis Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
  • Exergy Efficiency Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Exoskeleton Design of assistive exoskeleton robot for wrist [Volume 21, Issue 1, 2019, Pages 176-187]
  • Exoskeleton Design of an exoskeleton robot for rehabilitation of people with movement disabilities [Volume 23, Issue 1, 2021, Pages 170-193]
  • Experimental methods Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2013, Pages 55-68]
  • Experimental study Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2015, Pages 69-84]
  • Experimental study Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Experimental study Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Experimental study Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2023, Pages 6-26]
  • Experimental tests Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Experimental Validation The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
  • Explosive loading Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Explosive-welded Al/Cu/Al sheet Effect of machining parameters on the force and time of incremental forming of explosive-welded Al/Cu/Al multilayer [Volume 20, Issue 1, 2018, Pages 77-91]
  • Exponential cross-section Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2023, Pages 81-99]
  • Extended Drucker-Prager model Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2021, Pages 61-74]
  • Extended high order sandwich panel theory Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Extended Kalman Filter GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]

F

  • Fan Experimental study of diffuser effect on the fan performance [Volume 15, Issue 2, 2013, Pages 24-42]
  • Fatigue Test Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2021, Pages 93-113]
  • Fault diagnosis Diagnosing Simultaneous Faults of Bearing and Misalignment in Induction Motor using Combined Method of Bispectrum Analysis of Vibration Signal and KNN Algorithm [Volume 25, Issue 3, 2023, Pages 6-27]
  • Fault tolerance control Steer-By-Wire Vehicle Control after Tire Burst with Adaptive Sliding Mode Control [Volume 25, Issue 2, 2023, Pages 80-111]
  • Feedback linearization Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem [Volume 23, Issue 1, 2021, Pages 110-129]
  • FEM Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • FEM Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
  • FEM Investigation of the Effect of Gas Pressure Forming Parameters on Mold Filling and Sheet Thickness Distribution [Volume 23, Issue 1, 2021, Pages 43-63]
  • FG beam Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
  • FG-CNT Effect of geometrical parameters on natural frequencies of sandwich beam with composite faces reinforced with FG-CNT and two types of stiff and flexible core [Volume 21, Issue 3, 2019, Pages 101-137]
  • FGCNT Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
  • FG face sheets Temperature dependent analysis of sandwich beams with functionally graded face sheets under local loads [Volume 17, Issue 1, 2015, Pages 83-103]
  • Field study Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Field study Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2014, Pages 81-97]
  • Filament winding method Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2023, Pages 6-26]
  • Film cooling Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Finite element Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Finite element Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Finite element Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Finite element Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2021, Pages 131-151]
  • Finite element Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Finite element Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Finite element method. 316L An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Finite element methode Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Finite element modeling Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Finite element modeling Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Finite strain Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Finite width method Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Finned tube Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • First order Mirsky-Herman theory Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • First order shear deformation plate theory Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Flap Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2013, Pages 39-54]
  • Flapping-wing robot Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Flat plate Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Flexible Satellite Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Flexible wings Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • FLIGHT CONTROL SYSTEM Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Floating ring dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Flow analysis Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Flow noise Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2013, Pages 55-68]
  • Flow pattern Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2014, Pages 81-97]
  • Flow turbulator Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Fluent Develop an equation to calculate the amount of gas leakage from buried distribution gas pipelines [Volume 18, Issue 2, 2016, Pages 64-86]
  • Fluid Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Fluid conveying pipes An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Fluid Dynamic Analysis Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2017, Pages 23-40]
  • Fluid embedded tube A new analytical method to investigate the vibrational behavior of fluid embedded pipe [Volume 15, Issue 1, 2013, Pages 6-20]
  • Fluid-solid interaction Numerical Simulation and parametric study of Flexible Aorta Artery [Volume 19, Issue 3, 2017, Pages 6-23]
  • Flutter Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Flutter Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • FMEA Method Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Foam Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load [Volume 21, Issue 3, 2019, Pages 138-157]
  • Forced convection Numerical study of forced convection laminar flow of a nanofluid in a parallel-channel with discrete heat sources [Volume 18, Issue 4, 2016, Pages 29-54]
  • Forced convection Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Forced Vibration Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2021, Pages 178-204]
  • Force measurement Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Fouling Estimation of fouling profile in a heat exchanger pipe applying the conjugate gradient method based on the inverse algorithm [Volume 17, Issue 4, 2015, Pages 23-45]
  • Fractional Order Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem [Volume 23, Issue 1, 2021, Pages 110-129]
  • Fractography Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Fracture mechanism Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2021, Pages 6-28]
  • Free and forced vibrations The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Free fall test Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Free Oscillation Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Free vibration Flexural Vibrations Analysis of Saturated Porous Circular Plates Using Differential Quadrature Method [Volume 19, Issue 1, 2017, Pages 78-100]
  • Free vibration Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]
  • Free Vibrations Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2021, Pages 77-92]
  • Frequency analysis Frequency analysis of sandwich plates with temperature dependent flexible core based on the unified hybrid formulation [Volume 18, Issue 1, 2016, Pages 61-90]
  • Frequency analysis Effect of geometrical parameters on natural frequencies of sandwich beam with composite faces reinforced with FG-CNT and two types of stiff and flexible core [Volume 21, Issue 3, 2019, Pages 101-137]
  • Frequency Domain Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]
  • Friction connection Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2021, Pages 93-113]
  • FSDT Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
  • FTA Method Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Fuel-air cloud Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Fuel cell Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Fuel cell Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2019, Pages 59-82]
  • Fuel consumption" Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2021, Pages 57-76]
  • Functionally graded Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Functionally Graded Carbon Nanotube Composite Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
  • Functionally graded carbon nanotube reinforced composite Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Functionally graded material The effect of parameters of visco-Pasternak foundation on the vibration characteristic of a FG square plate integrated with FGP layers [Volume 18, Issue 3, 2016, Pages 78-95]
  • Functionally graded material Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Functionally graded material Thermoelastic Analysis of Rotating FGM Cylindrical Vessels In an Elastic Medium [Volume 20, Issue 3, 2018, Pages 200-212]
  • Functionally graded material Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Functionally graded material Thermo-elastic analysis of a functionally graded thick-walled cylinder with temperature – dependent material properties [Volume 21, Issue 3, 2019, Pages 79-100]
  • Functionally graded materials Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Functionally graded materials Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • Functionally graded materials Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Functionally graded materials Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • Functionally graded materials Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2021, Pages 152-177]
  • Functionally graded microshell Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Functionally graded stripe Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Functionally orthotropic half-plane Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
  • Fuzzy logic development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2020, Pages 206-227]
  • Fuzzy predictive system Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Fuzzy-Sliding Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2021, Pages 201-220]

G

  • Galerkin method Effect of Pitch Variation on a Propeller Frequencies Analytically, Numerically and Experimentally [Volume 25, Issue 3, 2023, Pages 28-51]
  • Gas engine A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Gaseous Fuel Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Gas Forming Investigation of the Effect of Gas Pressure Forming Parameters on Mold Filling and Sheet Thickness Distribution [Volume 23, Issue 1, 2021, Pages 43-63]
  • Gas Line-break The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2017, Pages 41-59]
  • Gas particle cyclone Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones [Volume 19, Issue 4, 2017, Pages 101-122]
  • Gas Turbine Potential Analysis of the combination of two types of thermal and member of desalination unit in converting a gas power plant into Combined Water and Power (CWP) [Volume 20, Issue 4, 2018, Pages 154-181]
  • Gas turbine engine design and simulation of the turbine section in a turbofan engine using numerical methods [(Articles in Press)]
  • Gas turbine modular Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2014, Pages 6-24]
  • Gear transmission system Chaos Analysis and Control in Gear Transmission System using Model Predictive Sliding Mode Algorithm [Volume 25, Issue 2, 2023, Pages 40-56]
  • Generalized differential quadrature method The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Generalized Differential Squares Method Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
  • Genetics algorithm Modelling of optimum cleaning of oil spill applying the genetics algorithm [Volume 15, Issue 2, 2013, Pages 6-23]
  • Geometrical optimization Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2021, Pages 131-151]
  • GHR model Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Gibbs-Appell Formultsion Nonlinear predictive control for trajectory tracking of a mobile manipulator [Volume 23, Issue 2, 2021, Pages 66-95]
  • Gibbs potential energy A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2020, Pages 6-29]
  • Gimbaled seeker Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2023, Pages 51-80]
  • Glass fibers Experimental study of quasi-static behavior of sandwich panel with metal/glass fiber trapezoidal core under Transverse loading [Volume 26, Issue 1, 2024]
  • Global-Local Theory Modified Global-local theory for investigating composite and sandwich plates under static transverse loading [Volume 20, Issue 1, 2018, Pages 132-151]
  • GPS data GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
  • Graded foam core Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Graphen Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Graphene Buckling analysis of micro-plates reinforced with graphene platelets with piezoelectric face-sheets [Volume 24, Issue 1, 2022, Pages 6-32]
  • Graphene Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity [Volume 24, Issue 3, 2022, Pages 6-27]
  • Graphene Nanofibers Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2020, Pages 51-71]
  • Graphene Platelets Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Graphene Platelets Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]
  • Grashof Number Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2019, Pages 149-173]
  • Green's function Analytical solution of the wave explosion by using the Green's function [Volume 20, Issue 3, 2018, Pages 170-184]
  • Greenhouse Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Greenhouse Numerical Study of the Heating System and Solar Radiation Effects on Temperature Variations in a Greenhouse with Glass Walls in Winter [Volume 25, Issue 2, 2023, Pages 57-79]
  • Gromacs Studying the Arm's Flexibility of Each Chain of Small Heat Shock Protein as a Nano Actuator [Volume 19, Issue 1, 2017, Pages 19-33]
  • Grooved Surface Numerical Simulation of Pool Boiling on a Grooved Horizontal Surface [Volume 24, Issue 2, 2022, Pages 77-91]
  • Ground effect Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2021, Pages 133-154]
  • Ground effect Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Guide vane Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2014, Pages 81-97]
  • Gurney flap Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2013, Pages 39-54]
  • Gurson's Failure Model Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]

H

  • Halpin-Tsai Rule Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Hardware in the loop simulation Estimation of Vehicle Longitudinal Dynamic Parameters through Hardware in the Loop Simulation [Volume 20, Issue 1, 2018, Pages 45-76]
  • Hardware-in-the-Loop Simulation Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Harmonic Component Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]
  • HCCI engine Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2014, Pages 55-80]
  • Heat and mass transfer Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Heat and mass transfer Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Heat Pipe Experimental Investigation a type of evaporation-based solar desalination system 1.5 liter with the photovoltaic and heat pipe technologies [Volume 19, Issue 4, 2017, Pages 18-35]
  • Heat recovery Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Heat recovery Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Heat Transfer Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2015, Pages 6-22]
  • Heat Transfer experimental study of the effect of multi wall Carbon nano tube - water nano fluid on heat transfer in a non metallic double pipe heat exchanger [Volume 20, Issue 2, 2018, Pages 40-53]
  • Heat Transfer Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Heat Transfer Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
  • Heat Transfer Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Heat Transfer Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Heat Transfer Numerical Simulation of Pool Boiling on a Grooved Horizontal Surface [Volume 24, Issue 2, 2022, Pages 77-91]
  • Heat Transfer Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Heat transfer coefficient Numerical investigation of thermal performance of water-Ethylene gelicol-Aluminium oxide in diesel engine radiator of automotive [Volume 14, Issue 4, 2012, Pages 76-92]
  • Heat transfer coefficient Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Heat transfer coefficient Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
  • Heat transfer zone Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
  • Helical grooved pipe Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Helicopter Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2021, Pages 133-154]
  • Heller cooling tower Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2015, Pages 69-84]
  • Heller cooling tower Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Hemodynamic flow Numerical Simulation and parametric study of Flexible Aorta Artery [Volume 19, Issue 3, 2017, Pages 6-23]
  • Hierarchical integral model Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • Higher order shear and normal deformation theory Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Higher order terms Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • High Order Theory Bending analysis of the curved sandwich beam with FG-CNT reinforced faces and flexible core [Volume 24, Issue 1, 2022, Pages 109-142]
  • Hilbert-Huang transform An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Homogeneous Distribution of nanoparticles Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Homogenization Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Homotopy analysis method Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Homotopy Perturbation Method Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Horizontal surface Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2013, Pages 69-89]
  • Hot and humid climate Evaluation the effect of smart glasses on solar heat gain and cooling loads in office building in hot and humid climate of Bushehr [Volume 20, Issue 4, 2018, Pages 97-117]
  • H∞ performance index Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]
  • Humanoid Robot Gait control of humanoid robot with toe joints based on reinforcement [(Articles in Press)]
  • Humanoid Robots Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]
  • HVAC System Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Hybrid Electric Vehicle Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Hybrid electric vehicles" Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2021, Pages 57-76]
  • Hybrid Energy System A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Hybrid layer wise/equivalent Single layer Frequency analysis of sandwich plates with temperature dependent flexible core based on the unified hybrid formulation [Volume 18, Issue 1, 2016, Pages 61-90]
  • Hybrid Nanofluid Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Hybrid Zero Dynamics analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2021, Pages 93-113]
  • Hydrodynamics investigation of the longitudinal effects of second step from base on the kogar vessel perfomance [Volume 20, Issue 2, 2018, Pages 92-114]
  • Hydrodynamic simulation The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
  • Hydrogel Bilayer Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Hyperelastic Numerical Simulation and parametric study of Flexible Aorta Artery [Volume 19, Issue 3, 2017, Pages 6-23]
  • Hyper-redundant Manipulator Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Hyperthermia Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]

I

  • Ignition Delay Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Impact Energy analysis of flexible multibody systems with internal damping under impact condition [Volume 19, Issue 1, 2017, Pages 101-117]
  • Impact acceleration Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Impact of vertical liquid jet Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2013, Pages 69-89]
  • Impedance control Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2023, Pages 135-154]
  • Impinging jet flow Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Implicit Discretization Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Incompressible flow Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Incompressible flow Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2013, Pages 6-22]
  • Incompressible Fluid Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2018, Pages 210-233]
  • Increased energy loss Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Incremental sheet forming Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Incremental sheet metal forming Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Incremental sheet metal forming Effect of machining parameters on the force and time of incremental forming of explosive-welded Al/Cu/Al multilayer [Volume 20, Issue 1, 2018, Pages 77-91]
  • Incremental theory Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Induced power Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2021, Pages 133-154]
  • Induction motors Diagnosing Simultaneous Faults of Bearing and Misalignment in Induction Motor using Combined Method of Bispectrum Analysis of Vibration Signal and KNN Algorithm [Volume 25, Issue 3, 2023, Pages 6-27]
  • Inertial Delay Control Robust Position Tracking of Magnetic Suspension System Using the Sliding Mode Controller based on Inertial Delay Control [Volume 23, Issue 1, 2021, Pages 194-220]
  • Infinite Cylinder Mixed-mode fracture analysis of infinite isotropic cylinder weakened by multiple cylindrical cracks [Volume 19, Issue 1, 2017, Pages 34-60]
  • Infinite thick–walled cylinder Thermo-elastic analysis of a functionally graded thick-walled cylinder with temperature – dependent material properties [Volume 21, Issue 3, 2019, Pages 79-100]
  • Initial Pressure The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2017, Pages 41-59]
  • Injection duration Fuel injection pressure and duration effects on passenger diesel engine performance and emissions [Volume 18, Issue 4, 2016, Pages 96-114]
  • Injection pressure Fuel injection pressure and duration effects on passenger diesel engine performance and emissions [Volume 18, Issue 4, 2016, Pages 96-114]
  • Inlet Blade Angle Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Inplane dislocation Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Input-output linearization ِDerivation of nonlinear dynamic equations of tractor-trailer mobile robots and their motion control employing input-output linearization control method [Volume 24, Issue 2, 2022, Pages 92-106]
  • Instability Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Instability An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Insulated Rail Joint Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Intelligent Collision Avoidance System Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Intelligent control system Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Interlayer contamination Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
  • Internal combustion engine Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2018, Pages 118-136]
  • Internal combustion engine Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Internal combustion engine Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
  • INVELOX Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2017, Pages 23-40]
  • Inverse Kinematics Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Irradiation Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2019, Pages 197-219]
  • Isogeometric Analysis Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]

J

  • Jackknife Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Journal Bearings Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Jump Phenomenon Perturbation analysis of resonant and non-resonant excitations of a beam equipped with a nonlinear vibration absorber [Volume 20, Issue 3, 2018, Pages 109-132]

K

  • Kelvin lattice structure An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Keywords Optimization Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Kinematic and Dynamic Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Kinematic model simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Kinematic optimization Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Kinetic energy preserving scheme One and two dimensional inviscid and two dimensional viscid flow analysis using the kinetic energy preserving scheme [Volume 14, Issue 4, 2012, Pages 93-117]
  • Kinetic single rate model Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Knee Foot Orthosis (AFO) Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]

L

  • Laminar plate Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Laminated composite plates Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Large amplitude vibration Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Larson-miller parameter.‎ Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Lateral Stability Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Lattice Boltzmann Improving the performance of lattice Boltzmann method in order to numerical study of gas flows in nano scale porous media [Volume 18, Issue 2, 2016, Pages 87-105]
  • Lattice Boltzmann Method numerical simulation of heat transfer in a cavity with discrete heat source using lattice Boltzmann method [Volume 19, Issue 4, 2017, Pages 75-100]
  • Lattice Boltzmann Method Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]
  • Lattice Boltzmann Method The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
  • Lattice Boltzmann Method Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
  • Layered Composites Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites [Volume 22, Issue 1, 2020]
  • Learn to walk Gait control of humanoid robot with toe joints based on reinforcement [(Articles in Press)]
  • Least square method Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Legged Robots Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]
  • Lift force Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Limit Cycle analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2021, Pages 93-113]
  • Lithium-ion batteries Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • LMI Adaptive Observer and Fault Tolerant Adaptive Optimal Sliding Mode Controller Designing for 3DOF Helicopter Model in presence of Fault and Actuator Saturation [Volume 23, Issue 4, 2021, Pages 6-28]
  • Local heating The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2018, Pages 78-96]
  • Longitudinal and circumferential stiffeners Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Low velocity impact Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2020, Pages 183-205]
  • Low velocity impact Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2023, Pages 6-26]
  • Low velocity impact Effects of geometric configurations of corrugated cores on the impact loading and energy absorption of sandwich panels with composite face sheets [Volume 26, Issue 1, 2024]
  • Low-velocity Impact Semi-Analytical Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method [Volume 20, Issue 1, 2018, Pages 25-44]
  • Lyapunov Functional Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2021, Pages 77-92]
  • Lyapunov-Krasovskii theorem Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2020, Pages 121-141]

M

  • Machine Learning A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Machine Learning Classification of five types of cancer data based on neural network methods, and analysis of gene expression using the feature selection fusion method [(Articles in Press)]
  • Machining parameters Effect of machining parameters on the force and time of incremental forming of explosive-welded Al/Cu/Al multilayer [Volume 20, Issue 1, 2018, Pages 77-91]
  • Magnetic field Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]
  • Magnetic field Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Magnetic field The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
  • Magnetic field Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Magnetic field Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Magnetic induction intensity Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method [Volume 24, Issue 4, 2022, Pages 109-128]
  • Magnetic nanoparticles Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Magnetic Suspension System Robust Position Tracking of Magnetic Suspension System Using the Sliding Mode Controller based on Inertial Delay Control [Volume 23, Issue 1, 2021, Pages 194-220]
  • Magneto rheological fluid damper Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Maneuver planning Design of Planning System for Automatic Turning Mission of Autonomous Car on Narrow and Wide Roads [Volume 24, Issue 4, 2022, Pages 29-60]
  • Mapping Introducing the FACL algorithm and numerical temperature simulator to stress analysis of aerospace structures [Volume 19, Issue 1, 2017, Pages 78-100]
  • Mass transfer coefficient The mass transfer coefficient of an industrial electrowinning cell under different operating conditions [Volume 22, Issue 2, 2020, Pages 103-130]
  • Material parameter Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Mathematical modeling Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Mathematical modeling Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Mathematical molding Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Mathieu type equations Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2020, Pages 30-55]
  • MATIANT cycle Energy and exergy assessment and parametric study of combination of MATIANT cycle with an organic Rankine cycle (non-emission) [Volume 20, Issue 2, 2018, Pages 6-22]
  • Mechanical Loading Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
  • Mechanical properties Investigation of constrained groove pressing on the Copper sheets [Volume 19, Issue 1, 2017, Pages 6-18]
  • Mechanical properties Fabrication and Analysis of a 3D truss Pattern Scaffold made by 3D printing Method [Volume 20, Issue 3, 2018, Pages 30-40]
  • Mechanical properties Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Mechatronic tools Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Mel-frequency cepstral coefficien A novel algorithm for detection of speaker emotion for interaction between human and robot [Volume 20, Issue 1, 2018, Pages 92-109]
  • Membrane Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Memory effect Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • MEMS gyroscope Effects of high-power high-frequency acoustic noise on the performance of MEMS vibratory gyroscopes [Volume 23, Issue 3, 2021, Pages 75-92]
  • Mesh Force Crack detection of a spur gear by frequency analysis of its vibration response [Volume 19, Issue 3, 2017, Pages 64-88]
  • Meteorological data Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Methane Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2014, Pages 55-80]
  • Michrochanel Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Microchannel Numerical study of non-uniform axial magnetic field effect on bubble growth in a boiling flow of nano ferro fluid in a microchannel [Volume 17, Issue 4, 2015, Pages 46-68]
  • Microchannel Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Micro-Channel Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2018, Pages 6-25]
  • Micro-channels Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2014, Pages 25-54]
  • Micromechanical Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Micromechanical models Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Micromechanics Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Micropolar model Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Microstructural change Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Micro wind turbine Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2019, Pages 130-148]
  • Mirsky-Hermann shear deformation theory Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Mixed Convection Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Mixed-integer linear programming Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • Mobile tractor-trailer robots ِDerivation of nonlinear dynamic equations of tractor-trailer mobile robots and their motion control employing input-output linearization control method [Volume 24, Issue 2, 2022, Pages 92-106]
  • Modal Parameters Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]
  • Modal test Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Modeling Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Model predictive sliding mode control Chaos Analysis and Control in Gear Transmission System using Model Predictive Sliding Mode Algorithm [Volume 25, Issue 2, 2023, Pages 40-56]
  • Modified couple stress theory Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Modified couple stress theory Buckling analysis of micro-plates reinforced with graphene platelets with piezoelectric face-sheets [Volume 24, Issue 1, 2022, Pages 6-32]
  • Modified nonlocal theory of elasticity An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Modified strain gradient theory Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Modified stress couple theory Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Molten carbonate fuel cell Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2014, Pages 98-122]
  • MOPSO Algorithm Intelligent Control Smart Timoshenko Beam by Using MOPSO-PID Controller Based on Optimal Location PZT Patch Actuator Approach [Volume 20, Issue 3, 2018, Pages 6-28]
  • Moving crack Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Moving load Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Moving Mass Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2020, Pages 142-163]
  • Moving morphable component Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Moving targets Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • MRT-LBM Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Multi energy model Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Multi-module Search Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Multiobjective function Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Multiple cracks Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2017, Pages 42-63]
  • Multiple cracks Multiple cracks in a functionally graded electro-magneto- elastic rectangular plane [Volume 20, Issue 3, 2018, Pages 80-108]
  • Multiple Scales Method Perturbation analysis of resonant and non-resonant excitations of a beam equipped with a nonlinear vibration absorber [Volume 20, Issue 3, 2018, Pages 109-132]
  • Multiple time scale method Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Multi-stage looped-branched system Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • Municipal Waste Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2014, Pages 98-122]
  • Museum Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2020, Pages 80-98]

N

  • Nano Improving the performance of lattice Boltzmann method in order to numerical study of gas flows in nano scale porous media [Volume 18, Issue 2, 2016, Pages 87-105]
  • Nano actuator Studying the Arm's Flexibility of Each Chain of Small Heat Shock Protein as a Nano Actuator [Volume 19, Issue 1, 2017, Pages 19-33]
  • Nano clay Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Nano clay Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Nanocomposite Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Nanocomposite Effect of Nanotubes Agglomeration on Bending Behavior of Trapezoidal Nanocomposites Reinforced with Carbon Nanotubes [Volume 25, Issue 1, 2023, Pages 60-79]
  • Nanocomposites Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Nanocomposites Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Nano fluid Numerical investigation of thermal performance of water-Ethylene gelicol-Aluminium oxide in diesel engine radiator of automotive [Volume 14, Issue 4, 2012, Pages 76-92]
  • Nano fluid The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2018, Pages 78-96]
  • Nanofluid Numerical study of forced convection laminar flow of a nanofluid in a parallel-channel with discrete heat sources [Volume 18, Issue 4, 2016, Pages 29-54]
  • Nanofluid boiling Numerical study of non-uniform axial magnetic field effect on bubble growth in a boiling flow of nano ferro fluid in a microchannel [Volume 17, Issue 4, 2015, Pages 46-68]
  • Nanofluids Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Nanofluids Experimental investigation of thermal performance of a sample of solar water heater vacuum tube modified with the help of nanofluids [Volume 24, Issue 4, 2022, Pages 129-147]
  • Nanofluids Newtonian & non Newtonian Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2019, Pages 149-173]
  • Nano-indentation test Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2021, Pages 61-74]
  • Nano tube Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2021, Pages 6-28]
  • Nanotube An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • NASA rotor 37 Numerical simulation of the effect of tip clearance on axial flow compressor performance [Volume 19, Issue 2, 2017, Pages 96-122]
  • Natural convection Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Natural convection Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Natural convection Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]
  • Natural convection The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
  • Natural convection heat transfer Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
  • Natural gas Develop an equation to calculate the amount of gas leakage from buried distribution gas pipelines [Volume 18, Issue 2, 2016, Pages 64-86]
  • Navier equation Thermoelastic Analysis of Rotating FGM Cylindrical Vessels In an Elastic Medium [Volume 20, Issue 3, 2018, Pages 200-212]
  • Navier-Stokes equations Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2013, Pages 6-22]
  • Navigation algorithm simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Navigation sensors Effects of high-power high-frequency acoustic noise on the performance of MEMS vibratory gyroscopes [Volume 23, Issue 3, 2021, Pages 75-92]
  • Net Present Value Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Networked Cascade Control System Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2021, Pages 114-130]
  • Neural network Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Neural network Classification of five types of cancer data based on neural network methods, and analysis of gene expression using the feature selection fusion method [(Articles in Press)]
  • Neural Networks Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem [Volume 23, Issue 1, 2021, Pages 110-129]
  • Newman’s model Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Newton-Raphson method Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2021, Pages 152-177]
  • Non-classical element of micro-plate Vibration Analysis of Kirchhoff micro plate with C2 Continuity [(Articles in Press)]
  • Non-dimensional Diagram The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2017, Pages 41-59]
  • Non-Homogeneous Catalytic Reaction Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2018, Pages 6-25]
  • Non-homogeneouse strip Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2017, Pages 42-63]
  • Nonlinear behavior Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Nonlinear dynamic inversion Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2021, Pages 29-56]
  • Nonlinear dynamics ِDerivation of nonlinear dynamic equations of tractor-trailer mobile robots and their motion control employing input-output linearization control method [Volume 24, Issue 2, 2022, Pages 92-106]
  • Nonlinear Dynamic Vibration Absorber Perturbation analysis of resonant and non-resonant excitations of a beam equipped with a nonlinear vibration absorber [Volume 20, Issue 3, 2018, Pages 109-132]
  • Nonlinear elastic foundation Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Nonlinear Forced Vibration Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Nonlinear Modeling Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2021, Pages 178-200]
  • Nonlinear Optimal control Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Nonlinear predictive control Nonlinear predictive control for trajectory tracking of a mobile manipulator [Volume 23, Issue 2, 2021, Pages 66-95]
  • Nonlinear spring and mass mechanism Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Nonlinear system GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
  • Nonlinear vibration Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Nonlinear vibration Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Nonlinear vibration Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Nonlinear vibration Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Nonlinear vibration Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Nonlinear vibrations dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Nonlocal theory Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Non-Newtonian fluid Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Non-Newtonian fluid The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2020, Pages 116-130]
  • Non-uniform magnetic field Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Nonuniform magnetic field Numerical study of non-uniform axial magnetic field effect on bubble growth in a boiling flow of nano ferro fluid in a microchannel [Volume 17, Issue 4, 2015, Pages 46-68]
  • Non-uniform zeta potential Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2014, Pages 25-54]
  • NSCSS Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Nucleate pool boiling Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2015, Pages 85-104]
  • Numerical analysis Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Numerical analysis Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Numerical approach Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Numerical investigation Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2018, Pages 182-209]
  • Numerical investigation Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • Numerical solution The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2018, Pages 78-96]
  • Numerical study Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Nuselt Number Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Nusselt number The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2018, Pages 78-96]
  • Nusselt number Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2019, Pages 174-196]
  • Nusselt number Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
  • Nusselt number Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]

O

  • Object Detection Real time Detection and Tracking of the Target Object using the Yolov3 Network by the Flying Robot [Volume 24, Issue 4, 2022, Pages 61-82]
  • Observability Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Office building The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2019, Pages 33-6]
  • Office building The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Omni-directional mobile robot&rsquo simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Online Longitudinal slip Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Onset characteristics Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • Open circuit water tunnel Experimental study of supercavitating flow over a cylindrical body equipped with various activators [Volume 16, Issue 2, 2014, Pages 90-109]
  • OpenFOAM Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
  • OpenSim Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Operating temperature Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2023, Pages 6-26]
  • Operational Modal Analysis Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]
  • Optimal guidance Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Optimal operation Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Optimization Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Optimization Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Optimization Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Optimization Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Optimization Potential Analysis of the combination of two types of thermal and member of desalination unit in converting a gas power plant into Combined Water and Power (CWP) [Volume 20, Issue 4, 2018, Pages 154-181]
  • Optimization Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2018, Pages 118-136]
  • Optimization Improve the performance of a rotor blade by changing the distance between the tipping point and axial displacement of the blade [Volume 21, Issue 4, 2019, Pages 107-129]
  • Optimization Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Optimization Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Optimization Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2023, Pages 100-134]
  • Optimum oil spill cleaning model Modelling of optimum cleaning of oil spill applying the genetics algorithm [Volume 15, Issue 2, 2013, Pages 6-23]
  • Optimum Power Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2021, Pages 178-200]
  • ORC Energy and exergy assessment and parametric study of combination of MATIANT cycle with an organic Rankine cycle (non-emission) [Volume 20, Issue 2, 2018, Pages 6-22]
  • Organic Rankine Cycle Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2014, Pages 6-24]
  • Orientation The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Oriented Distribution of Nanoparticles Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Outplane loading Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Overturning moment Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]

P

  • Packing Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • Painter Robot Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2023, Pages 135-154]
  • Panel surface temperature Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2019, Pages 220-238]
  • Parabolic Trough Collector Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
  • Parallelogram Mechanism Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2021, Pages 131-151]
  • Parallelogram shaped Cavity Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]
  • Parallel robot Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Parallel Shock absorber Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Parameter estimation Estimation of Vehicle Longitudinal Dynamic Parameters through Hardware in the Loop Simulation [Volume 20, Issue 1, 2018, Pages 45-76]
  • Parametrical study Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2014, Pages 6-24]
  • Partial cavitation Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Partial load Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions [Volume 19, Issue 3, 2017, Pages 89-107]
  • Particle fraction Investigation of Entropy generation in Axisymmetric Stagnation Point Flow of Nano Fluid Impinging on the Cylinder With Constant Wall Temperature [Volume 21, Issue 4, 2019, Pages 58-34]
  • Particles diameter Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Particle Swarm Optimization Algorithm Design and Practical Implementation of a Feed-Forward Neural Observer to Control Quadrotor [Volume 21, Issue 1, 2019, Pages 97-115]
  • Partitioned Algorithm Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Passenger car diesel engine Fuel injection pressure and duration effects on passenger diesel engine performance and emissions [Volume 18, Issue 4, 2016, Pages 96-114]
  • Path Planning Design of Planning System for Automatic Turning Mission of Autonomous Car on Narrow and Wide Roads [Volume 24, Issue 4, 2022, Pages 29-60]
  • PD control Design and Practical Implementation of a Feed-Forward Neural Observer to Control Quadrotor [Volume 21, Issue 1, 2019, Pages 97-115]
  • PEC Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Pendentive Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Penetrator Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2021, Pages 6-28]
  • Performance Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • Performance Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Performance Analytical solution of flow and heat transfer in a three-tube heat exchanger consisting of evaporator and condenser partially filled with porous media [Volume 24, Issue 2, 2022, Pages 160-190]
  • Performance test Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2016, Pages 55-71]
  • Peritoneal dialysis device Designing and implementing an infrared control-sensing system to detect air bubbles in the tubes of the peritoneal dialysis machine. [Volume 26, Issue 1, 2024]
  • Permeability Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Persian Gulf Modelling of optimum cleaning of oil spill applying the genetics algorithm [Volume 15, Issue 2, 2013, Pages 6-23]
  • Perturbation method Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Perturbation method Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Perturbation method Thermo-elastic analysis of a functionally graded thick-walled cylinder with temperature – dependent material properties [Volume 21, Issue 3, 2019, Pages 79-100]
  • Perturbation technique Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Perturbation technique Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Phase Change Material Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Phase Difference Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2018, Pages 210-233]
  • Photovoltaic Experimental Investigation a type of evaporation-based solar desalination system 1.5 liter with the photovoltaic and heat pipe technologies [Volume 19, Issue 4, 2017, Pages 18-35]
  • Photovoltaic-Thermoelectric hybrid Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Physical adsorption Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2020, Pages 6-23]
  • PID Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2021, Pages 29-56]
  • PID Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem [Volume 23, Issue 1, 2021, Pages 110-129]
  • PID Controller Intelligent Control Smart Timoshenko Beam by Using MOPSO-PID Controller Based on Optimal Location PZT Patch Actuator Approach [Volume 20, Issue 3, 2018, Pages 6-28]
  • Piezoelectric The effect of parameters of visco-Pasternak foundation on the vibration characteristic of a FG square plate integrated with FGP layers [Volume 18, Issue 3, 2016, Pages 78-95]
  • Piezoelectric Intelligent Control Smart Timoshenko Beam by Using MOPSO-PID Controller Based on Optimal Location PZT Patch Actuator Approach [Volume 20, Issue 3, 2018, Pages 6-28]
  • Piezoelectric layer Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2017, Pages 42-63]
  • Piezoelectric Sensor Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2021, Pages 178-200]
  • Piezoelectric voltage Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Pilot Fuel Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2016, Pages 55-71]
  • Pilot Fuel Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Pitch dynamics Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Plasma Actuator EHD Simulation of Plasma Actuator Effect on Fluid Flow with Boundary Condition Modification in Suzen-Huang Model [Volume 19, Issue 4, 2017, Pages 53-74]
  • Plasma Actuator Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2018, Pages 182-209]
  • Plastic Buckling Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Plate pin-fin heat sink Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Plate thickness Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Plug region Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Plunging motion Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2013, Pages 39-54]
  • Point Support Semi-Analytical Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method [Volume 20, Issue 1, 2018, Pages 25-44]
  • Polygonal hydraulic jump Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2013, Pages 69-89]
  • Polypropylene Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Polypropylene Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Pontryagin’s Minimum Principle Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Pool boiling Numerical Simulation of Pool Boiling on a Grooved Horizontal Surface [Volume 24, Issue 2, 2022, Pages 77-91]
  • Pool boiling An Exprimental Study on Bubble Growth and Departure in Pool Boiling on Wire Mesh and Providing Empirical Relations [Volume 25, Issue 3, 2023, Pages 136-160]
  • Porous Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity [Volume 24, Issue 3, 2022, Pages 6-27]
  • Porous environment Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Porous geometry generation Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Porous material Flexural Vibrations Analysis of Saturated Porous Circular Plates Using Differential Quadrature Method [Volume 19, Issue 1, 2017, Pages 78-100]
  • Porous media Improving the performance of lattice Boltzmann method in order to numerical study of gas flows in nano scale porous media [Volume 18, Issue 2, 2016, Pages 87-105]
  • Porous media Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2015, Pages 6-22]
  • Porous media Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Porous media Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
  • Power series A new analytical method to investigate the vibrational behavior of fluid embedded pipe [Volume 15, Issue 1, 2013, Pages 6-20]
  • Practical Implementation Design and Practical Implementation of a Feed-Forward Neural Observer to Control Quadrotor [Volume 21, Issue 1, 2019, Pages 97-115]
  • Prediction of lean Modelling and analysis of semi experimental hybrid method for Prediction of lean blowout in turbine [Volume 18, Issue 4, 2016, Pages 72-95]
  • Predictive control" Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2021, Pages 57-76]
  • Pressure Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Pressure drop Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Pressure drop Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2020, Pages 154-171]
  • Pressure drop Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Pressure drop Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Pressure drop coefficient Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2013, Pages 23-38]
  • Pressure Drop Rate The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2017, Pages 41-59]
  • Pressure regulation station Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2013, Pages 55-68]
  • Pretibial weakness Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Produced carbon The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Production carbon The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2019, Pages 33-6]
  • Progressive buckling Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Propeller Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • Propeller blade vibrations Effect of Pitch Variation on a Propeller Frequencies Analytically, Numerically and Experimentally [Volume 25, Issue 3, 2023, Pages 28-51]
  • Propeller Performance Volume of Fluid Method Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • Protective screen Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2013, Pages 23-38]
  • Pseudoelastic Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2021, Pages 178-204]
  • Pulsating Flow Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Pumping Plant The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Pumping power Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Push Recovery Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]

Q

  • Quarter car model Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Quarter difference method Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Quasi-3D beam theory Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]
  • Quasi three dimensional Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]

R

  • Radial return method Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Radiation Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2017, Pages 60-79]
  • Radiation heat transfer Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Rankine cycle with organic fluid Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Rankin organic cycle Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
  • Reaction Delay Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Real-time energy management" Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2021, Pages 57-76]
  • Real-time Path- Planning Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]
  • Reciprocating compressors Condition Monitoring of Reciprocating Compressors using Probabilistic Neural Network and Optimization with Genetic Algorithm [Volume 25, Issue 3, 2023, Pages 84-112]
  • Rectangular plate Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • Rectangular thick plate Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Reddy – Levinson model Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Redundancy Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Redundancy Resolution Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Redundant Parallel Robot Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Redundant Robot Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Re-entrant jet Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Refregerator Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Refrigerant saturation quality Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Refused derived fuel Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Reinforced Composites Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2020, Pages 164-182]
  • Reinforcement Learning A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Relative humidity Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Reliability-based Optimization Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Remaining Life Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Renewable Energy A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Representative Elementary Volume scale Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2020, Pages 205-240]
  • Representative volume element (RVE) Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Residual life estimate Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Residual stresses Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Resonant and Non-resonant Excitations Perturbation analysis of resonant and non-resonant excitations of a beam equipped with a nonlinear vibration absorber [Volume 20, Issue 3, 2018, Pages 109-132]
  • Resonator length Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Response surface methodology Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Reverse osmosis Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2023, Pages 100-134]
  • Ritz method Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Ritz method Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Road condition Determining the magic tire model parameters using self-organizing map method and assessment the road condition on the parameters [Volume 23, Issue 2, 2021, Pages 114-128]
  • Road friction coefficient Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Robotic Rehabilitation Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2023, Pages 135-154]
  • Robot Manipulator Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2021, Pages 131-151]
  • Robust control Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2021, Pages 114-130]
  • Robust PID Control Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Rod drawing A new velocity field for analysis of rod drawing process through curved dies [Volume 23, Issue 2, 2021, Pages 1-22]
  • Ross coefficient Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2019, Pages 220-238]
  • Rotary Inertia Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2017, Pages 108-126]
  • Rotating microbeams Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2021, Pages 152-177]
  • Rotating obstacle Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
  • Rotational excitation Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2023, Pages 81-99]
  • RPN Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • RSM Effect of machining parameters on the force and time of incremental forming of explosive-welded Al/Cu/Al multilayer [Volume 20, Issue 1, 2018, Pages 77-91]
  • RSM turbulent model Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones [Volume 19, Issue 4, 2017, Pages 101-122]
  • Running Robot analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2021, Pages 93-113]
  • Rutting phenomena Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]

S

  • Sample with different depth notch Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]
  • Sandwich beam Temperature dependent analysis of sandwich beams with functionally graded face sheets under local loads [Volume 17, Issue 1, 2015, Pages 83-103]
  • Satellite control Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Satellite positioning GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2020, Pages 56-79]
  • Scaffold Fabrication and Analysis of a 3D truss Pattern Scaffold made by 3D printing Method [Volume 20, Issue 3, 2018, Pages 30-40]
  • Screen printing Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Screw Angle Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Screw dislocation Multiple cracks in a functionally graded electro-magneto- elastic rectangular plane [Volume 20, Issue 3, 2018, Pages 80-108]
  • Screw Pitch Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Second step position investigation of the longitudinal effects of second step from base on the kogar vessel perfomance [Volume 20, Issue 2, 2018, Pages 92-114]
  • Selective laser melting An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Self-organizing map Determining the magic tire model parameters using self-organizing map method and assessment the road condition on the parameters [Volume 23, Issue 2, 2021, Pages 114-128]
  • Self-tuning resonance frequency Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2023, Pages 81-99]
  • Semi-analytical approach Semi-Analytical Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method [Volume 20, Issue 1, 2018, Pages 25-44]
  • Semi Analytically Method Natural Frequency Study and parametric Sensitivity Analysis of Axial wind turbine [Volume 20, Issue 1, 2018, Pages 110-131]
  • Semi-analytical method Semi-Analytical Buckling Analysis of a Composite Plate with Circular Cutouts on an Elastic Foundation, Under Different Boundary and Partial Edge Loading Conditions [Volume 19, Issue 3, 2017, Pages 89-107]
  • Semi-analytical solution Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Semi-analytical solution Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Semi-Empirical Relation Modelling and analysis of semi experimental hybrid method for Prediction of lean blowout in turbine [Volume 18, Issue 4, 2016, Pages 72-95]
  • Sensitivity analysis Natural Frequency Study and parametric Sensitivity Analysis of Axial wind turbine [Volume 20, Issue 1, 2018, Pages 110-131]
  • Sensitivity analysis Three-Dimensional Parametric Modeling of Axial-Flux Eddy-Current Braking System with Effects of Skin Depth and Temperature [Volume 23, Issue 4, 2021, Pages 155-177]
  • Sequential shock Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Series Robot Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2023, Pages 135-154]
  • Shape memory alloy Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2021, Pages 178-204]
  • Shape memory alloy The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Shape Memory Alloys Buckling analysis of circular cylindrical shells made of shape memory alloys in uniform temperature and axisymmetric loading using the exat and numerical solutions [Volume 18, Issue 3, 2016, Pages 61-77]
  • Shape Memory Alloys Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Shear deformation theory Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Shear fracture surface Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Shear modulus Investigating the effects of length, diameter and chirality on the mechanical properties of defective carbon nanotubes [Volume 21, Issue 1, 2019, Pages 188-217]
  • Shell & Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Shell model Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Shock absorber design Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Shock tube Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Shock wave Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Short-time linear quadratic form Estimation of Vehicle Longitudinal Dynamic Parameters through Hardware in the Loop Simulation [Volume 20, Issue 1, 2018, Pages 45-76]
  • Signal processing An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Silencer Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2013, Pages 55-68]
  • Similarity solution Investigation of Entropy generation in Axisymmetric Stagnation Point Flow of Nano Fluid Impinging on the Cylinder With Constant Wall Temperature [Volume 21, Issue 4, 2019, Pages 58-34]
  • Simulation Fuel injection pressure and duration effects on passenger diesel engine performance and emissions [Volume 18, Issue 4, 2016, Pages 96-114]
  • Simulation Simulation and Analysis of termoeconomic solar compression refrigeration with tracker in the Isfahan with using the Trnsys. [Volume 19, Issue 4, 2017, Pages 36-52]
  • Simultaneous production Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Sintering Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Sinusoidal and Indented tube Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Six bar mechanism Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Size Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Sliding Mode Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2021, Pages 29-56]
  • Sliding mode controller Design and implementation of model-free adaptive robust sliding mode controller for 3-DOF helicopter model by using time delay estimation [Volume 24, Issue 1, 2022, Pages 143-159]
  • Sliding Mode Observer Steer-By-Wire Vehicle Control after Tire Burst with Adaptive Sliding Mode Control [Volume 25, Issue 2, 2023, Pages 80-111]
  • Slip velocity Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2020, Pages 72-87]
  • Smart glass Evaluation the effect of smart glasses on solar heat gain and cooling loads in office building in hot and humid climate of Bushehr [Volume 20, Issue 4, 2018, Pages 97-117]
  • Smoothing Spline An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Solar air collector Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Solar air heater Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Solar cavity receiver Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Solar chimney Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2015, Pages 6-22]
  • Solar Collector Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2019, Pages 197-219]
  • Solar Desalination Experimental Investigation a type of evaporation-based solar desalination system 1.5 liter with the photovoltaic and heat pipe technologies [Volume 19, Issue 4, 2017, Pages 18-35]
  • Solar Energy Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2015, Pages 6-22]
  • Solar Energy Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Solar Energy Experimental investigation of thermal performance of a sample of solar water heater vacuum tube modified with the help of nanofluids [Volume 24, Issue 4, 2022, Pages 129-147]
  • Solar Energy Analysis of Energy and Exergy of Ammonia Salt Double Effect Absorption Refrigeration System with Solar Collector [Volume 25, Issue 2, 2023, Pages 132-154]
  • Solar heat gain The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Solar photovoltaic pump Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2019, Pages 220-238]
  • Solar radiation Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Solar vacuum tube collectors Experimental investigation of thermal performance of a sample of solar water heater vacuum tube modified with the help of nanofluids [Volume 24, Issue 4, 2022, Pages 129-147]
  • Solid oxide fuel cell Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Somigliana dislocation Mixed-mode fracture analysis of infinite isotropic cylinder weakened by multiple cylindrical cracks [Volume 19, Issue 1, 2017, Pages 34-60]
  • South Pars Gas Complex Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • SPD Evaluation the effect of smart glasses on solar heat gain and cooling loads in office building in hot and humid climate of Bushehr [Volume 20, Issue 4, 2018, Pages 97-117]
  • Spectral element Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Spectral element matrix Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Spectral surface Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2017, Pages 60-79]
  • Spherical Cap Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Spur gear Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Squeeze Film Damper dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Stability Improvement Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Stabilization Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2021, Pages 77-92]
  • Stable jump Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2013, Pages 69-89]
  • Stagnation point flow Investigation of Entropy generation in Axisymmetric Stagnation Point Flow of Nano Fluid Impinging on the Cylinder With Constant Wall Temperature [Volume 21, Issue 4, 2019, Pages 58-34]
  • Static Testing Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2021, Pages 93-113]
  • Steady periodic characteristics Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • Stepwise regression Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Stiffened cylindrical shells Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Storage tank Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Strain gradient elasticity theory Vibration Analysis of Kirchhoff micro plate with C2 Continuity [(Articles in Press)]
  • Stress calculation Using of Boundary Elements Method in calculating the displacements and stresses of points on the boundaries of a non-homogeneous material with variable modulus of elasticity [(Articles in Press)]
  • Stress intensity factors Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Stress intensity factors Mixed-mode fracture analysis of infinite isotropic cylinder weakened by multiple cylindrical cracks [Volume 19, Issue 1, 2017, Pages 34-60]
  • Stress intensity factors Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Strp Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Sucking air wind tunnel Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Supercavitation Experimental study of supercavitating flow over a cylindrical body equipped with various activators [Volume 16, Issue 2, 2014, Pages 90-109]
  • Super elastic Buckling analysis of circular cylindrical shells made of shape memory alloys in uniform temperature and axisymmetric loading using the exat and numerical solutions [Volume 18, Issue 3, 2016, Pages 61-77]
  • Super elasticity Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Super-harmonic resonance Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Supersonic Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Suport Vector Machine Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2021, Pages 114-132]
  • Surface hydrophilicity Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2015, Pages 85-104]
  • Surface stress An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Suzen-Huang Model EHD Simulation of Plasma Actuator Effect on Fluid Flow with Boundary Condition Modification in Suzen-Huang Model [Volume 19, Issue 4, 2017, Pages 53-74]
  • Swarm Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Swarm movement algorithm Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Swarm robots Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Swarm robots aggregation Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Swelling induced bending Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Symmetrical Buckling Buckling analysis of circular cylindrical shells made of shape memory alloys in uniform temperature and axisymmetric loading using the exat and numerical solutions [Volume 18, Issue 3, 2016, Pages 61-77]
  • Synthesis gas composition Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2014, Pages 98-122]

T

  • Tandem rotors Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2021, Pages 133-154]
  • Tape casting Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Target Tracking Real time Detection and Tracking of the Target Object using the Yolov3 Network by the Flying Robot [Volume 24, Issue 4, 2022, Pages 61-82]
  • Task assignment Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • Temperature Studying the Arm's Flexibility of Each Chain of Small Heat Shock Protein as a Nano Actuator [Volume 19, Issue 1, 2017, Pages 19-33]
  • Temperature change Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Temperature dependent Temperature dependent analysis of sandwich beams with functionally graded face sheets under local loads [Volume 17, Issue 1, 2015, Pages 83-103]
  • Temperature dependent properties Frequency analysis of sandwich plates with temperature dependent flexible core based on the unified hybrid formulation [Volume 18, Issue 1, 2016, Pages 61-90]
  • Temperature-dependent properties Thermo-elastic analysis of a functionally graded thick-walled cylinder with temperature – dependent material properties [Volume 21, Issue 3, 2019, Pages 79-100]
  • Temperature sensitive hydrogels Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Termal barrier coating Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Ternary Nano composite Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Test design Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Test engine cell Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Thermal Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Thermal and Mass Jump Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2018, Pages 6-25]
  • Thermal barrier coating Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings [Volume 24, Issue 4, 2022, Pages 83-108]
  • Thermal comfort Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Thermal conductivity An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
  • Thermal efficiency of water heater Experimental investigation of thermal performance of a sample of solar water heater vacuum tube modified with the help of nanofluids [Volume 24, Issue 4, 2022, Pages 129-147]
  • Thermal load Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Thermally Induced Vibration Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2017, Pages 108-126]
  • Thermally Induced Vibration Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Thermal Performance Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Thermal Resistance Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Thermal shock Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings [Volume 24, Issue 4, 2022, Pages 83-108]
  • Thermoacoustic Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Thermoplastic Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2021, Pages 93-113]
  • Thickness ratio Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Thick wall cylinder Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Three Degree Freedom Helicopter Adaptive Observer and Fault Tolerant Adaptive Optimal Sliding Mode Controller Designing for 3DOF Helicopter Model in presence of Fault and Actuator Saturation [Volume 23, Issue 4, 2021, Pages 6-28]
  • Three degree of freedom simulator table Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2023, Pages 51-80]
  • Three Mass Inverted Pendulum Model Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]
  • Three-pipe heat exchanger Analytical solution of flow and heat transfer in a three-tube heat exchanger consisting of evaporator and condenser partially filled with porous media [Volume 24, Issue 2, 2022, Pages 160-190]
  • Three point bending test Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Thrust force Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Time delay estimation Design and implementation of model-free adaptive robust sliding mode controller for 3-DOF helicopter model by using time delay estimation [Volume 24, Issue 1, 2022, Pages 143-159]
  • Time varying stiffness Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Timoshenko beam Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Timoshenko beam Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2021, Pages 77-92]
  • Timoshenko beam The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Tire model Determining the magic tire model parameters using self-organizing map method and assessment the road condition on the parameters [Volume 23, Issue 2, 2021, Pages 114-128]
  • Tire normal load Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Tire pressure monitoring system Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2023, Pages 81-99]
  • TNT equivalency model Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Topological derivative Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Torsional spring Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Total site Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
  • Total site utility Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2020, Pages 131-153]
  • Toth Crack Crack detection of a spur gear by frequency analysis of its vibration response [Volume 19, Issue 3, 2017, Pages 64-88]
  • Tracking Nonlinear predictive control for trajectory tracking of a mobile manipulator [Volume 23, Issue 2, 2021, Pages 66-95]
  • Tractor Semi-Trailer System Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Trammel pendulum Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Transient heat transfer Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • Transient thermal loading Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings [Volume 24, Issue 4, 2022, Pages 83-108]
  • Transition Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Transversely isotropic Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Trapezoidal Plate Effect of Nanotubes Agglomeration on Bending Behavior of Trapezoidal Nanocomposites Reinforced with Carbon Nanotubes [Volume 25, Issue 1, 2023, Pages 60-79]
  • Tray tank Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Trigenaration Energy System Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Triplex-tube heat exchanger Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • TRMS Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration [Volume 25, Issue 1, 2023, Pages 80-96]
  • TRNSYS Simulation and Analysis of termoeconomic solar compression refrigeration with tracker in the Isfahan with using the Trnsys. [Volume 19, Issue 4, 2017, Pages 36-52]
  • Truss Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • TSKem fuzzy inference syst Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • Tube Heat Exchanger Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Turbine design and simulation of the turbine section in a turbofan engine using numerical methods [(Articles in Press)]
  • Turbocharger Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Turbulence Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Turbulence distribution intensity Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2013, Pages 23-38]
  • Turbulent Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Turbulent flow Numerical investigation of thermal performance of water-Ethylene gelicol-Aluminium oxide in diesel engine radiator of automotive [Volume 14, Issue 4, 2012, Pages 76-92]
  • Turbulent flow Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones [Volume 19, Issue 4, 2017, Pages 101-122]
  • Turbulent flow Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2020, Pages 24-50]
  • Turbulent flow Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Turbulent flow Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method [Volume 24, Issue 4, 2022, Pages 109-128]
  • Twisted Beam Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Twisted tape Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Two-fluid model Comparison of one-dimensional two-fluid models to predict two-phase gas-liquid flow variables in a vertical pipe and determination of an appropriate model [Volume 20, Issue 4, 2018, Pages 26-53]
  • Two-link robot Fuzzy Dynamic Output Feedback Controller Design for Position Control of a Two-Link Robot [Volume 23, Issue 2, 2021, Pages 199-219]
  • Two-phase flow Comparison of one-dimensional two-fluid models to predict two-phase gas-liquid flow variables in a vertical pipe and determination of an appropriate model [Volume 20, Issue 4, 2018, Pages 26-53]
  • Two-pipe heat exchanger Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Two-pipe heat exchanger Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Two-step planing vessel investigation of the longitudinal effects of second step from base on the kogar vessel perfomance [Volume 20, Issue 2, 2018, Pages 92-114]

U

  • UAV Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • Uncertainty Robust Position Tracking of Magnetic Suspension System Using the Sliding Mode Controller based on Inertial Delay Control [Volume 23, Issue 1, 2021, Pages 194-220]
  • Uncertainty Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Uncertainty quantification Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • Uncoupled Thermoelasticity Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2017, Pages 108-126]
  • Uncoupled Thermoelasticity Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Underactuated system fuzzy model reference learning control for underactuated segway robot [Volume 21, Issue 3, 2019, Pages 5-26]
  • Upper bound method A new velocity field for analysis of rod drawing process through curved dies [Volume 23, Issue 2, 2021, Pages 1-22]

V

  • Variable Frequency Drive The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Various distributions of CNTs Buckling and free vibration analysis of cylindrical panel reinforced by various distributions of CNTs on elastic foundation [Volume 18, Issue 3, 2016, Pages 19-44]
  • Vectorcardiogram A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Vectorcardiogram Modeling A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Vectorized high order expansions Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Vehicle longitudinal dynamics Estimation of Vehicle Longitudinal Dynamic Parameters through Hardware in the Loop Simulation [Volume 20, Issue 1, 2018, Pages 45-76]
  • Vehicle speed Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2021, Pages 29-60]
  • Velocity field A new velocity field for analysis of rod drawing process through curved dies [Volume 23, Issue 2, 2021, Pages 1-22]
  • Venturi Numerical Investigation of Cavitation Erosion in the Venturi using the Eulerian- Lagrangian Method [Volume 25, Issue 4, 2023, Pages 27-50]
  • Vertical flying robot Design of a Neural Network Controller for Flying Robots Using a PIP and a Backstopping Trainer [Volume 24, Issue 4, 2022, Pages 6-28]
  • V grove absorber plate Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Vibration Analysis A new analytical method to investigate the vibrational behavior of fluid embedded pipe [Volume 15, Issue 1, 2013, Pages 6-20]
  • Vibration Analysis Natural Frequency Study and parametric Sensitivity Analysis of Axial wind turbine [Volume 20, Issue 1, 2018, Pages 110-131]
  • Vibration Analysis Diagnosing Simultaneous Faults of Bearing and Misalignment in Induction Motor using Combined Method of Bispectrum Analysis of Vibration Signal and KNN Algorithm [Volume 25, Issue 3, 2023, Pages 6-27]
  • Vibration Response Crack detection of a spur gear by frequency analysis of its vibration response [Volume 19, Issue 3, 2017, Pages 64-88]
  • Vibrations Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Vibration Suppression Intelligent Control Smart Timoshenko Beam by Using MOPSO-PID Controller Based on Optimal Location PZT Patch Actuator Approach [Volume 20, Issue 3, 2018, Pages 6-28]
  • Virtual work principle Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • Viscoelastic materials Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • Viscoelastic substrate Experimental Study of the dynamics of droplet impact on the viscoelastic Substrate [Volume 19, Issue 2, 2017, Pages 80-95]
  • Visco-Pasternak foundation The effect of parameters of visco-Pasternak foundation on the vibration characteristic of a FG square plate integrated with FGP layers [Volume 18, Issue 3, 2016, Pages 78-95]
  • Viscous Flow Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Volterra dislocation Mixed-mode fracture analysis of infinite isotropic cylinder weakened by multiple cylindrical cracks [Volume 19, Issue 1, 2017, Pages 34-60]
  • Volterra dislocation Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2020, Pages 99-120]
  • Voltra Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Von Mises yield criterion Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Vortex tube Optimization of vortex tube parameters to achieve the minimum possible temperature [Volume 24, Issue 2, 2022, Pages 107-133]

W

  • Wall with circumferential pattern Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Waste heat recovery Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2020, Pages 88-115]
  • Waste rubber Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Wavelet Packet Transform Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2021, Pages 114-132]
  • Waves propagation Analytical solution of the wave explosion by using the Green's function [Volume 20, Issue 3, 2018, Pages 170-184]
  • Wear Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Weibull distribution Modelling of optimum cleaning of oil spill applying the genetics algorithm [Volume 15, Issue 2, 2013, Pages 6-23]
  • Weight of passenger Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2021, Pages 29-60]
  • Well-posedness criteria Comparison of one-dimensional two-fluid models to predict two-phase gas-liquid flow variables in a vertical pipe and determination of an appropriate model [Volume 20, Issue 4, 2018, Pages 26-53]
  • Wet bulb temperature Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • Wetting Experimental Study of the dynamics of droplet impact on the viscoelastic Substrate [Volume 19, Issue 2, 2017, Pages 80-95]
  • Wheeled Robot Nonlinear predictive control for trajectory tracking of a mobile manipulator [Volume 23, Issue 2, 2021, Pages 66-95]
  • WIG Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Windbreaker wall Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2015, Pages 69-84]
  • Wind Energy Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Wind Energy Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Wind Tunnel Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2015, Pages 69-84]
  • Wind Tunnel Experimental study of diffuser effect on the fan performance [Volume 15, Issue 2, 2013, Pages 24-42]
  • Wind Turbine Natural Frequency Study and parametric Sensitivity Analysis of Axial wind turbine [Volume 20, Issue 1, 2018, Pages 110-131]
  • Wind velocity distribution Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2013, Pages 23-38]
  • Wire coils Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Wire matrix Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Wire Mesh An Exprimental Study on Bubble Growth and Departure in Pool Boiling on Wire Mesh and Providing Empirical Relations [Volume 25, Issue 3, 2023, Pages 136-160]
  • Woven wire Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2013, Pages 23-38]

X

  • XRD Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]

Y

  • Yolo Algorithm Real time Detection and Tracking of the Target Object using the Yolov3 Network by the Flying Robot [Volume 24, Issue 4, 2022, Pages 61-82]
  • Young's modulus Investigating the effects of length, diameter and chirality on the mechanical properties of defective carbon nanotubes [Volume 21, Issue 1, 2019, Pages 188-217]